Acylindrical part of diameter d is loaded by an axial force p. this causes a stress of pia, where a= 10-14. if the load is known with an uncertainty of 112 percent, the diameter is known within 14 percent (tolerances), and the stress that causes failure (strength) is known within t19 percent, determine the minimum design factor that will guarantee that the part will not fail.

What precautions should you take to prevent injuries when dealing with heavy loads?

An air conditioning system consist of a 5 cm diameter pipe, operating at a pressure of 200 kpa. the air initially enters the pipe at 15°c with a velocity of 20 m/s and relative humidity of 80%. if the heat supply throughout the process is 960 w, determine the relative humidity and the temperature at the outlet

Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10