Engineering, 13.09.2019 23:30 derekcalhoun4943
Acasting process was performed using an alloy and certain type of sand mold, it took 147 seconds for a cylindrical shaped alloy with diameter 20mm and length 50mm to solidify a) determine the value of the mold constant in the chvorinov's rule b) if the same alloy and mold type were used, find the total solidification time for a cube shaped casting. the cube is 30mm on a side.
Answers: 1
Another question on Engineering
Engineering, 03.07.2019 23:20
Two technicians are discussing the intake air temperature (iat) sensor. technician a says that the computer uses the iat sensor as a backup to the engine coolant temperature (ect) sensor. technician b says that the powertrain control module (pcm) will subtract the calculated amount of fuel if the air measures hot. who is correct
Answers: 3
Engineering, 04.07.2019 18:10
Abrake has a normal braking torque of 2.8 kip in and heat-dissipating cast-iron surfaces whose mass is 40 lbm. suppose a load is brought to rest in 8.0 s from an initial angular speed of 1600 rev/min using the normal braking torque; estimate the temperature rise of the heat dissipating surfaces.
Answers: 3
Engineering, 04.07.2019 18:10
Burgers vector is generally parallel to the dislocation line. a)-true b)-false
Answers: 2
Engineering, 04.07.2019 18:10
True or false (explain) (110)[111] is a slip system in bcc metals . the {111} family in fcc contains 8 planes. resolved shear stress (rss) in single crystals is just related to the applied stress. critical resolved shear stress (crss) in single crystal metals is direct proportional to the number of defects in the structure
Answers: 2
You know the right answer?
Acasting process was performed using an alloy and certain type of sand mold, it took 147 seconds for...
Questions
Mathematics, 04.07.2020 22:01
Health, 04.07.2020 22:01
