subject
Engineering, 13.09.2019 23:30 callmedarthvadorplz

Asteam power plant operates between the pressure limit of 3.0 mpa for the boiler and 50 kpa for the condenser. if the plant operates in an ideal rankine cycle with superheated vapor enters the turbine at 3 mpa and 450c, determine: a) the moisture content at the inlet of the condenser, b) the net work per unit mass of steam flowing, in kj/kg, c) the heat transfer to the steam in the boiler in kj per kg of steam, d) the thermal efficiency, e) the heat transfer to cooling water passing through the condenser, in kj per kg of steam flowing.

ansver
Answers: 3

Another question on Engineering

question
Engineering, 03.07.2019 15:10
Ahouse has the following electrical appliance usage (1) single 40w lamp used for 4 hours per day (2) single 60w fan used for 12 hours per day (3) single 200w refrigerator that runs 24 hours per day with compressor run 12 hours and off 12 hours find the solar power inverter size in watt with correction factor of 1.25.
Answers: 1
question
Engineering, 04.07.2019 18:10
Air is to be cooled in the evaporator section of a refrigerator by passing it over a bank of 0.8-cm-outer-diameter and 0.4-m-long tubes inside which the refrigerant is evaporating at -20°c. air approaches the tube bank in the normal direction at 0°c and 1 atm with a mean velocity of 4 m/s. the tubes are arranged in-line with longitudinal and transverse pitches of sl- st 1.5 cm. there are 30 rows in the flow direction with 15 tubes in each row. determine (a) the refrigeration capacity of this system and (b) pressure drop across the tube bank. evaluate the air properties at an assumed mean temperature of -5°c and 1 atm. is this a good assumption?
Answers: 1
question
Engineering, 04.07.2019 18:10
Different types of steels contain different elements that alter the characteristics of the steel. for each of the following elements, explain what the element does when alloyed with steel.
Answers: 2
question
Engineering, 04.07.2019 18:10
Ifa component is made of two or more materials with different modulus of elasticity (e), it is called a composite member and we calculate the factor·n". mention the formula for calculating n". also, ifn> 1, explain what will happen to the 1. transformed.gi) ifn 1, what will happen to the material when transformed material when
Answers: 1
You know the right answer?
Asteam power plant operates between the pressure limit of 3.0 mpa for the boiler and 50 kpa for the...
Questions
question
Mathematics, 26.03.2021 07:10
question
Chemistry, 26.03.2021 07:10
question
Mathematics, 26.03.2021 07:10
Questions on the website: 13722360