subject
Engineering, 13.09.2019 21:30 lizzyhearts

There are three options for heating a particular house: a. gas: $1.33/therm where 1 therm=105,500 kj b. electric resistance: $0.12/kwh where 1 kwh=3600 kj c. oil heating: $2.30/gallon where 1 gal of oil=138,500 kj. which option is the cheapest for this house?

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 18:10
You are making beer. the first step is filling the glass carboy with the liquid wort. the internal diameter of the carboy is 15 in., and you wish to fill it up to a depth of 2 ft. if your wort is drawn from the kettle using a siphon process that flows at 3 gpm, how long will it take to fill?
Answers: 1
question
Engineering, 04.07.2019 18:10
Water at the rate of 1 kg/s is forced through a tube with a 2.5 cm inner diameter. the inlet water temperature is 15°c, and the outlet water temperature is 50°c. the tube wall temperature is 14°c higher than the local water temperature all along the length of the tube. what is the length of the tube?
Answers: 3
question
Engineering, 04.07.2019 19:10
Aplate of dimensions 3 m x 3 m is placed 0.37 mm apart from a fixed plate. the plate requires a force of 2n to move at speed of 45 cm/s. evaluate the viscosity of the fluid in between the plates
Answers: 3
question
Engineering, 04.07.2019 19:20
Acommercial grade cubical freezer, 4 m on a side, has a composite wall consisting of an exterior sheet of 5.0-mm thick plain carbon steel (kst= 60.5 w/m k), an intermediate layer of 100-mm thick polyurethane insulation (kins 0.02 w/m k), and an inner sheet of 5.0- mm thick aluminium alloy (kal polyurethane insulation and both metallic sheets are each characterized by a thermal contact resistance of r 2.5 x 104 m2 k/w. (a) what is the steady-state cooling load that must be maintained by the refrigerator under conditions for which the outer and inner surface temperatures are 25°c and -5°c, respectively? (b) for power saving purpose, which wall material should be increased/reduced in. thickness in order to reduce 50% of the cooling load found in part (a)? redesign the thickness of the proposed material. 177 w/m-k). adhesive interfaces between the q=575.93 w
Answers: 2
You know the right answer?
There are three options for heating a particular house: a. gas: $1.33/therm where 1 therm=105,500...
Questions
question
Social Studies, 13.07.2019 13:30
question
Mathematics, 13.07.2019 13:30
question
Mathematics, 13.07.2019 13:30
question
Mathematics, 13.07.2019 13:30
question
Mathematics, 13.07.2019 13:30
question
Mathematics, 13.07.2019 13:30
question
Mathematics, 13.07.2019 13:30
Questions on the website: 13722363