Engineering, 13.09.2019 21:30 Sjanaya853

Asinglephase transformer has the following
nameplate data:
rating 150kva
primaryvoltage 7.2kv
secondaryvoltage 600v
frequency 60hz
whenoperating at rated load (full load) the
following lossesoccur:
hysterisisloss 550 w
eddy currentloss 400 w
total copperlosses 1800 w (primary + secondary)
thetransformer is to be used on a 50 hz system with
the restrictionthat it is to
maintain thesame maximum core flux density and the
same total losses. thiswill
result in thesame full load operating temperature.
determine:
(i) the newprimary and secondary voltage rating at
50 hz;
(ii) the newkva rating of the transformer of the 50
hz.

Answers: 3

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

The mass flow rate of the fluid remains constant in all steady flow process. a)- true b)- false

Answers: 1

Answer

Engineering, 04.07.2019 18:20

Steam enters a converging nozzle at 3.0 mpa and 500°c with a at 1.8 mpa. for a nozzle exit area of 32 cm2, determine the exit velocity, mass flow rate, and exit mach number if the nozzle: negligible velocity, and it exits (a) is isentropic (b) has an efficiency of 94 percent

Answers: 2

Answer

Engineering, 06.07.2019 02:30

Precipitation hardening can be achieved in many light alloys by a three-step heat treatment. what is carried out and what is the purpose at each step? why is such a treatment necessary based on the nucleation and growth theory of phase transformation. compare this treatment with tempering martensite for carbon steels (similarities and differences).

Answers: 1

Answer

Engineering, 06.07.2019 04:10

Steam enters a converging nozzle at 3.0 mpa and 500°c with a negligible velocity, and it exits at 1.8 mpa. for a nozzle exit area of 32 cm2, determine the exit velocity, mass flow rate, and exit mach number if the nozzle: is isentropic (a) (b) has an efficiency of 94 percent

Answers: 1

Answer

You know the right answer?

Asinglephase transformer has the following
nameplate data:
rating 150kva
primaryv...

Questions