subject
Engineering, 13.09.2019 16:20 alanizyc

Scale model of a boat is towed through water at a speed of 1.2 m/s. the model has a drag of 0.44 n due to the surface waves that radiate away from the hull. what is the drag on the real boat?

ansver
Answers: 3

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.
Answers: 1
question
Engineering, 04.07.2019 18:10
The higher the astm grain-size number, the coarser the grain is. a)-true b)-false
Answers: 3
question
Engineering, 04.07.2019 18:10
The filament of an incandescent lamp has a temperature of 2000k. calculate the fraction of radiation emitted in the visible light band if the filament is approximated as blackbody
Answers: 2
question
Engineering, 04.07.2019 18:10
Water at 55c flows across a flat plate whose surface temperature is held constant at 95c. if the temperature gradient at the plate's surface for a given value of x is 18 c/mm, find a) local heat transfer coefficient. b) heat flux
Answers: 3
You know the right answer?
Scale model of a boat is towed through water at a speed of 1.2 m/s. the model has a drag of 0.44 n d...
Questions
question
Mathematics, 12.07.2021 04:40
question
Mathematics, 12.07.2021 04:40
question
Geography, 12.07.2021 04:40
question
English, 12.07.2021 04:40
question
Mathematics, 12.07.2021 04:50
question
English, 12.07.2021 04:50
Questions on the website: 13722363