Engineering, 13.09.2019 01:30 shamiya15
It is necessary to lay out and mark a point d exactly 300.00 ft distant from point c for a construction project. a steel tape with an actual length of 100.03 ft is used. what should be the distance measured from c to accurately set the mark for point d? (assume a standard 20 lb tension is used, and temperature of 68of)
Answers: 1
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
Engineering, 04.07.2019 19:10
The air in an automobile tire with a volume of 0.015 m3 is at 32°c and 140 kpa gage. determine the amount of air that must be added to raise the pressure to the recommended value of 206 kpa gage. assume the atmospheric pressure to be 128 kpa and the temperature and the volume to remain constant.[r-0.287 kj/kgk]
Answers: 3
Engineering, 04.07.2019 19:20
Brief discuss how the presence of dislocations in crystal structures can be an advantage and a disadvantage to engineer and designers.
Answers: 3
Engineering, 06.07.2019 02:30
Plot schematically the tensile stress versus strain curves for a typical thermoplastic material at a temperature below its glass transition temperature (tg and at a temperature above its tg, respectively. do the same for a typical thermosetting material. list in a table any differences or similarities between the two materials at t> tg and t < tg, respectively, and relate them to the structures of the two types of polymers
Answers: 3
It is necessary to lay out and mark a point d exactly 300.00 ft distant from point c for a construct...
Mathematics, 29.09.2020 06:01
English, 29.09.2020 06:01
Mathematics, 29.09.2020 06:01
Social Studies, 29.09.2020 06:01
Mathematics, 29.09.2020 06:01
Mathematics, 29.09.2020 06:01
Mathematics, 29.09.2020 06:01
Mathematics, 29.09.2020 06:01
Chemistry, 29.09.2020 06:01
History, 29.09.2020 06:01