Engineering, 11.09.2019 01:20 kobiemajak

The outlet structure on a pond is used to regulate the flow out of a pond for different storm events. an outlet structure must be designed to discharge 2.20 m^3/min when the water surface elevation in the pond reaches 1.52 m, and 6.29 m^3/min when the water surface elevation reaches 2.60 m. the outlet structure will be a circular oriface and a sharp crested rectangular weir combination, with the centroid of the oriface at an elevation of 0.90 m and the weir crest at an elevation of 2.50 m. both will discharge to free outfall conditions. assume an oriface coefficient of 0.6. find the oriface diameter needed to supply the correct discharge when the water surface reaches the first specified elevation. what will the discharge from the oriface be when the water surface reaches the second specified elevation? find the width of the weir needed to supply the extra discharge necessary to meet the requirement. use mannings formula when necessary.

Answers: 2

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

An air compression refrigeration system is to have an air pressure of 100 psia in the brine tank and an allowable air temperature increase of 60°f for standard vapor compression cycle temperatures of 77 f entering the expansion cylinder and 14 f entering the compression cylinder, calculate the coefficient of performance a. 2.5 b 3.3 c. 4.0 d. 5.0

Answers: 3

Answer

Engineering, 04.07.2019 18:20

Steam enters a converging nozzle at 3.0 mpa and 500°c with a at 1.8 mpa. for a nozzle exit area of 32 cm2, determine the exit velocity, mass flow rate, and exit mach number if the nozzle: negligible velocity, and it exits (a) is isentropic (b) has an efficiency of 94 percent

Answers: 2

Answer

Engineering, 04.07.2019 19:10

10 kg of co2 is initially contained at 400 kpa and 300 k. the gas constant for carbon dioxide is 189 j/lkg k) and has a specific heat ratio, k, of 1.289. isentropic expansion then occurs until the pressure is 200 kpa. a) determine the initial volume of co2 in m. b) determine the final temperature in k. c) determine the work done by the system during the expansion kl.

Answers: 2

Answer

Engineering, 06.07.2019 03:10

An electrical kettle is made out of stainless steel,weighs two pounds (when empty) with a heating element that consumes 2 kw of electricity. assuming that the water and the kettle are at the same uniform temperature at any moment of time, calculate the shortest possible time to bring 2 quarts of water from room temperature to the onset of boiling.

Answers: 1

Answer

You know the right answer?

The outlet structure on a pond is used to regulate the flow out of a pond for different storm events...

Questions