Engineering, 10.09.2019 04:30 jbot9050

For a k+ –cl– ion pair, attractive and repulsive energies ea and er , respectively, depend on the distance between the ions r, according to for these expressions, energies are expressed in electron volts per k+ –cl– pair, and r is the distance in nanometers. the net energy en is just the sum of the two expressions above. (a) superimpose on a single plot en, er, and ea versus r up to 1.0 nm. (b) on the basis of this plot, determine (i) the equilibrium spacing r0 between the k+ and cl– ions,

Answers: 2

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Steel is coated with a thin layer of ceramic to protect against corrosion. what do you expect to happen to the coating when the temperature of the steel is increased significantly? explain.

Answers: 1

Answer

Engineering, 04.07.2019 18:20

Inadequate stores control is not an obstacle to effective work order system. (clo4) a)-true b)-false

Answers: 3

Answer

Engineering, 04.07.2019 18:20

Amixture of slurry and mud is to be pumped through a horizontal pipe of diameter 500 mm. the fluid behaves as a bingham plastic with a yield stress of 30 pa and viscosity 0.04 pa.s. describe the effects of the shear stress through a transverse section of the pipe by plotting the variation in shear stress and velocity profile: (i) just before the slurry starts to move (ii) as the slurry flows when the pressure gradient is double that in part (i)

Answers: 3

Answer

Engineering, 04.07.2019 19:10

What is the chief metrological difference between measuring with a microscope and with an electronic comparator? a. the microscope is limited to small workpieces.a. the microscope is limited to small workpieces. c. the comparator can only examine one point on the workpiece. d. the microscope carries its own standard.

Answers: 1

Answer

You know the right answer?

For a k+ –cl– ion pair, attractive and repulsive energies ea and er , respectively, depend on the di...

Questions