Design an active bandpass filter subject to the following constraints:
- cascade a first-ord...
Engineering, 05.09.2019 20:10 janeou17xn
Design an active bandpass filter subject to the following constraints:
- cascade a first-order active lowpass filter, a first-order active highpass filter and possibly an inverting amplifier.
- fc1=300hz and fc2=3khz.
- maximum gain (gain at f0) in the passband shall be 20db.
- using standard resistor values.
draw the schematic diagram of your finished design.
Answers: 1
Engineering, 04.07.2019 18:10
Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.
Answers: 1
Engineering, 04.07.2019 18:10
The drive force for diffusion is 7 fick's first law can be used to solve the non-steady state diffusion. a)-true b)-false
Answers: 1
Engineering, 04.07.2019 18:20
Inspection for bearing condition will include: (clo4) a)-color b)-smell c)-size d)-none of the above
Answers: 1
Engineering, 04.07.2019 18:20
Water vapor initially at 10 bar and 400 °c is contained within a piston-cylinder assembly. the water lost heat to the surrounding according to isochoric (iso-volumetric) process until its temperature is 150 °c. the water is then condensed isothermally to saturated liquid. for the water as a system, calculate the work in kj/kg
Answers: 2
Chemistry, 16.10.2020 15:01
Mathematics, 16.10.2020 15:01
Mathematics, 16.10.2020 15:01
Social Studies, 16.10.2020 15:01
Mathematics, 16.10.2020 15:01
Chemistry, 16.10.2020 15:01
Biology, 16.10.2020 15:01
Physics, 16.10.2020 15:01
English, 16.10.2020 15:01
History, 16.10.2020 15:01
Mathematics, 16.10.2020 15:01
SAT, 16.10.2020 15:01