Engineering, 30.08.2019 16:10 TMeansStupidity
Estimate the weight of a 25 km gas pipeline with a dn 600 mm, od of 610 mm, and a wall thickness of 12.7 mm.
Answers: 3
Engineering, 04.07.2019 18:10
What difference(s) did you notice using a pneumatic circuit over hydraulic circuit.explain why the pneumatic piston stumbles when it hits an obstacle.
Answers: 2
Engineering, 04.07.2019 18:10
Burgers vector is generally parallel to the dislocation line. a)-true b)-false
Answers: 2
Engineering, 04.07.2019 18:10
Awall of 0.5m thickness is to be constructed from a material which has average thermal conductivity of 1.4 w/mk. the wall is to be insulated with a material having an average thermal conductivity of 0.35 w/mk so that heat loss per square meter shall not exceed 1450 w. assume inner wall surface temperature of 1200°c and outer surface temperature of the insulation to be 15°c. calculate the thickness of insulation required.
Answers: 3
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
Estimate the weight of a 25 km gas pipeline with a dn 600 mm, od of 610 mm, and a wall thickness of...
English, 18.07.2019 16:50
Health, 18.07.2019 16:50
Mathematics, 18.07.2019 16:50
Social Studies, 18.07.2019 16:50
History, 18.07.2019 16:50
Mathematics, 18.07.2019 16:50
Mathematics, 18.07.2019 16:50
History, 18.07.2019 16:50