Engineering, 24.08.2019 05:10 blevinssam4783

An overhead crane carries a load of 50 tonne. under static conditions the maximum deflection is 5 mm (excluding the elongation of the ropes) and the maximum bending stress is ou mpa. the ropes have a combined cross-sectional area of 1 x 10-m². include the elongation of the rope and calculate the maximum deflection at the end of the rope and the maximum stress induced in the crane if the 50 tonne is lowered at a constant speed of 0,1 m/sec and then suddenly stopped when the rope has a length of (a) 3 m; and (b) 20 m (e = 210 gpa).

Answers: 3

Show answers

Another question on Engineering

Engineering, 03.07.2019 15:10

Ahouse has the following electrical appliance usage (1) single 40w lamp used for 4 hours per day (2) single 60w fan used for 12 hours per day (3) single 200w refrigerator that runs 24 hours per day with compressor run 12 hours and off 12 hours find the solar power inverter size in watt with correction factor of 1.25.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Ahot wire operates at a temperature of 200°c while the air temperature is 20°c. the hot wire element is a tungsten wire of 5 um diameter and 2 mm in length. plot using excel current, heat transfer and heat generated by the wire for air velocity varying from 1-10 m/s in steps of lm/s? matlab the sensor voltage output, resistance, or assume nu 0.989 re033pr13 take air properties at tr (200°c20°c)/2 = 110°c properties of tungsten: c 0.13 kj/kg.k 3 p 19250 kg/m k (thermal conductivity) = 174 w/m.k

Answers: 2

Answer

Engineering, 04.07.2019 19:10

How to increase the thermal officiency of an ideal simple rankino cycle? among these methods, which one is the best and why?

Answers: 2

Answer

Engineering, 04.07.2019 19:10

What is creep? what is stress relaxation?

Answers: 1

Answer

You know the right answer?

An overhead crane carries a load of 50 tonne. under static conditions the maximum deflection is 5 mm...