subject
Engineering, 24.08.2019 02:10 emilyplays474

Arefrigeration plant operates in pretoria on refrigerant r134a at an evaporator pressure of 105 kpa (gauge) and a condensing pressure of 920 kpa (gauge). there is a sub-cooling of 3 k with a superheat of the gas entering the compressor of 8 k. the compressor is a four-cylinder reciprocating compressor with a bore of 67 mm and a stroke of 57 mm with an estimated capacity of 35 kw. the compressor is directly coupled to an electric motor running at 1470 rev/min and a power consumption of 19,5 kw. calculate: (a) the clearance volume efficiency if the compressor clearance is 3,6 %; (b) the actual volumetric efficiency; (c) the compression efficiency when the mechanical efficiency is 85% and the motor efficiency 90%.

ansver
Answers: 3

Another question on Engineering

question
Engineering, 03.07.2019 14:10
The y form of iron is known as: a) ferrite b) cementite c) perlite d) austenite
Answers: 3
question
Engineering, 03.07.2019 19:30
When using the ohmmeter function of a digital multimeter, the leads are placed in what position relative to the component being tested? a. parallel b. control c. series d. line
Answers: 3
question
Engineering, 04.07.2019 18:10
Apump is used to circulate hot water in a home heating system. water enters the well-insulated pump operating at steady state at a rate of 0.42 gal/min. the inlet pressure and temperature are 14.7 lbf/in.2, and 180°f, respectively; at the exit the pressure is 60 lbf/in.2 the pump requires 1/15 hp of power input. water can be modeled as an incompressible substance with constant density of 60.58 lb/ft3 and constant specific heat of 1 btu/lb or. neglecting kinetic and potential energy effects, determine the temperature change, in °r, as the water flows through the pump.
Answers: 1
question
Engineering, 04.07.2019 18:10
For the closed feedwater heater below, feedwater enters state 3 at a pressure of 2000 psia and temperature of 420 °f at a rate of ix10 ibhr. the feedwat extracted steam enters state 1 at a pressure of 1000 psia and enthalpy of 1500 btu/lbm. the extracted er leaves at an enthalpy of 528.7 btu/lbm steam leaves as a saturated liquid. (16) a) determine the mass flow rate of the extraction steam used to heat the feedwater (10) b) determine the terminal temperature difference of the closed feedwater heater
Answers: 3
You know the right answer?
Arefrigeration plant operates in pretoria on refrigerant r134a at an evaporator pressure of 105 kpa...
Questions
question
Mathematics, 24.08.2019 12:30
question
Social Studies, 24.08.2019 12:30
Questions on the website: 13722367