Engineering, 23.08.2019 05:10 robertobi1988
Athermocouple used to measure temperature of gas flowing through a duct records 280°c. if emissivity of junction is 0.4 and film coefficient of heat transfer is 150w/m^2k. (i) find the true temperature of gas. (ii what should be the emissivity of junction in order to reduce the temperature error be 40%? the temperature of the duct wall is 140°c
Answers: 1
Another question on Engineering
Engineering, 04.07.2019 18:10
Water at 55c flows across a flat plate whose surface temperature is held constant at 95c. if the temperature gradient at the plate's surface for a given value of x is 18 c/mm, find a) local heat transfer coefficient. b) heat flux
Answers: 3
Engineering, 04.07.2019 18:20
Derive the correction factor formula for conical nozzle i=-(1+ cosa) and calculate the nozzle angle correction factor for a nozzle whose divergence hal-fangle is 13 (hint: assume that all the mass flow originates at the apex of the cone.
Answers: 3
Engineering, 04.07.2019 18:20
Acertain flow of air (at stp) has a velocity distribution given by v i (in ft/s). if this flow is going through a 4 ft square area in the yz-plane (centered at the origin), what is the mass flow rate (in lbm/s)?
Answers: 2
Engineering, 04.07.2019 19:10
Acircular aluminum shaft mounted in a journal is shown. the symmetric clearance gap between the shaft and journal is filled with sae 10w-30 oil at t 30°c. the shaft is caused to turn by the attached mass and cord. develop and solve a differential equation for the angular speed of the shaft as a function of time.
Answers: 2
You know the right answer?
Athermocouple used to measure temperature of gas flowing through a duct records 280°c. if emissivity...
Questions
History, 13.07.2019 08:00
Social Studies, 13.07.2019 08:00
History, 13.07.2019 08:00
History, 13.07.2019 08:00
Social Studies, 13.07.2019 08:00
History, 13.07.2019 08:00
Social Studies, 13.07.2019 08:00
