Engineering, 22.08.2019 16:10 Priskittles

The tank is filled with water (p = 997 kg/m), the tank height is 4 m and its surface area is 2 m². the opening at the bottom has a diameter of 1.5x102 m and a surface area of 1.77x10+ m². if the velocity of water escaping at the opening is represented by v = 2.g. h, where g is the gravity acceleration (9.81 m²/s) and h is the height of water inside the tank (m). a. what will be the height of water in the tank after 60 min.? b. how much time it is required to fully empty the tank? c. if a feed stream is introduced into the tank at rate of 7.84x10% (m/s), what will be the final height of water inside the tank?

Answers: 3

Show answers

Another question on Engineering

Engineering, 03.07.2019 14:10

The y form of iron is known as: a) ferrite b) cementite c) perlite d) austenite

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Ariver flows from north to south at 8 km/h. a boat is to cross this river from west to east at a speed of 20 km/h (speed of the boat with respect to the earth/ground). at what angle (in degrees) must the boat be pointed upstream such that it will proceed directly across the river (hint: find the speed of the boat with respect to water/river)? a 288 b. 21.8 c. 326 d. 30.2

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Give heat transfer applications for the following, (i) gas turbines (propulsion) ) gas turbines (power generation). (iii) steam turbines. (iv) combined heat and power (chp). (v) automotive engines

Answers: 1

Answer

Engineering, 04.07.2019 18:10

True or false (explain) (110)[111] is a slip system in bcc metals . the {111} family in fcc contains 8 planes. resolved shear stress (rss) in single crystals is just related to the applied stress. critical resolved shear stress (crss) in single crystal metals is direct proportional to the number of defects in the structure

Answers: 2

Answer

You know the right answer?

The tank is filled with water (p = 997 kg/m), the tank height is 4 m and its surface area is 2 m². t...

Questions