subject
Engineering, 21.08.2019 23:30 KevinReed6444

Compressed air is discharged thorough a converging nozzle. the tank pressure is 500kpa, temperature 300k and the local atmospheric pressure is 101kpa. the inlet area of the nozzle is 100cm2; the inlet exit area is 34 cm2. find: (a)the exit gas pressure. (b)the exit gas velocity. (c)the mass flow rate the velocity at the inlet.(d)the pressure at the inlet.(e) assume air acts as ideal gas with y=1.4

ansver
Answers: 3

Another question on Engineering

question
Engineering, 03.07.2019 14:10
Explain the difference laminar and turbulent flow. explain it with the shear stress and the velocity profiles.
Answers: 1
question
Engineering, 04.07.2019 18:10
Aloaded platform of total mass 500 kg is supported by a dashpot and by a set of springs of effective stiffness 72 kn/m. it is observed that when the platform is depressed through a distance x = 12.5 cm below its equilibrium position and then released without any initial velocity; it reaches its equilibrium position in the shortest possible time without overshoot. find the position and velocity of the loaded platform 0.10 sec. after its release. if a further load of 400 kg is added to the platform, find, i) the frequency of damped vibrations, and i) the amplitude of vibration after 2 complete oscillations, given that the initial amplitude is 15 cm.
Answers: 1
question
Engineering, 04.07.2019 18:10
Ariver flows from north to south at 8 km/h. a boat is to cross this river from west to east at a speed of 20 km/h (speed of the boat with respect to the earth/ground). at what angle (in degrees) must the boat be pointed upstream such that it will proceed directly across the river (hint: find the speed of the boat with respect to water/river)? a 288 b. 21.8 c. 326 d. 30.2
Answers: 3
question
Engineering, 04.07.2019 18:10
Compute the pressure drop of 30°c air flowing with a mean velocity of 8 m/s in a circular sheet-metal duct 300 mm in diameter and 15 m long. use a friction factor, f 0.02, and pair = 1.1644 kg/m a. 37.26 pa b. 25.27 pa n c. 29.34 pa d. 30.52 pa
Answers: 1
You know the right answer?
Compressed air is discharged thorough a converging nozzle. the tank pressure is 500kpa, temperature...
Questions
question
English, 17.04.2020 17:05
question
Mathematics, 17.04.2020 17:05
Questions on the website: 13722367