Engineering, 21.08.2019 01:20 taetae83
Sketch and label a generic isothermal (ttt) transformation diagram for a eutectoid steel.
Answers: 1
Engineering, 04.07.2019 18:10
Compute the pressure drop of 30°c air flowing with a mean velocity of 8 m/s in a circular sheet-metal duct 300 mm in diameter and 15 m long. use a friction factor, f 0.02, and pair = 1.1644 kg/m a. 37.26 pa b. 25.27 pa n c. 29.34 pa d. 30.52 pa
Answers: 1
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
Engineering, 04.07.2019 19:10
For a process taking place in a closed system containing gas, the volume and pressure relationship is pvi-constant. -1.5 bar, the process starts with initial conditions, pi = =0.03 m3 and ends with final volume, v2-0.05 m3 determine the work done by the gas.
Answers: 2
Engineering, 04.07.2019 19:20
Apiping systems consists of 6 m of 6-std type k and 12 m of 4-std type k, both drawn copper tubing. the system conveys ethylene glycol at a rate of 0.013 m3/s. the pressure drop across the system is to be calculated. there are two 90° elbows in the 6-in pipe, a reduction from the 6-in pipe to the 4-in pipe and four 90° elbows in the 4-in pipe. all fittings are soldered (same as flanged) and regular. the inlet and outlet of the system are at the same height.
Answers: 1
Sketch and label a generic isothermal (ttt) transformation diagram for a eutectoid steel....
Mathematics, 18.10.2020 23:01
Computers and Technology, 18.10.2020 23:01
English, 18.10.2020 23:01
Mathematics, 18.10.2020 23:01
Mathematics, 18.10.2020 23:01
Mathematics, 18.10.2020 23:01
English, 18.10.2020 23:01
Social Studies, 18.10.2020 23:01
Biology, 18.10.2020 23:01
Advanced Placement (AP), 18.10.2020 23:01
Mathematics, 18.10.2020 23:01
Mathematics, 18.10.2020 23:01
Biology, 18.10.2020 23:01