Engineering, 20.08.2019 21:30 ValeryGi3721
Sae 30 oil at 20°c flows between two horizontal 0.50-m-wide parallel plates sepa- rated by 30 mm. the length of the top and bottom plates in the direction of flow is 2 m, the bottom plate is stationary, the top plate moves at 3 cm/s, an adverse pressure gradient of 700 pa/m is applied between the plates, and the flow is laminar between the plates. determine the flow rate between the plates and the force that must be applied to move the top plate.
Answers: 2
Engineering, 03.07.2019 14:10
If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.
Answers: 3
Engineering, 04.07.2019 18:10
What difference(s) did you notice using a pneumatic circuit over hydraulic circuit.explain why the pneumatic piston stumbles when it hits an obstacle.
Answers: 2
Engineering, 04.07.2019 18:10
The drive force for diffusion is 7 fick's first law can be used to solve the non-steady state diffusion. a)-true b)-false
Answers: 1
Engineering, 04.07.2019 18:10
Water at the rate of 1 kg/s is forced through a tube with a 2.5 cm inner diameter. the inlet water temperature is 15°c, and the outlet water temperature is 50°c. the tube wall temperature is 14°c higher than the local water temperature all along the length of the tube. what is the length of the tube?
Answers: 3
Sae 30 oil at 20°c flows between two horizontal 0.50-m-wide parallel plates sepa- rated by 30 mm. th...
History, 26.10.2020 21:40
Mathematics, 26.10.2020 21:40
Mathematics, 26.10.2020 21:40
Biology, 26.10.2020 21:40
Advanced Placement (AP), 26.10.2020 21:40
Biology, 26.10.2020 21:40
Biology, 26.10.2020 21:40
English, 26.10.2020 21:40
Arts, 26.10.2020 21:40