Answers: 2
Engineering, 04.07.2019 18:10
Water in a partially filled large tank is to be supplied to the roof top, which is 8 m above the water level in the tank, through a 2.2-cm-internal-diameter pipe by maintaining a constant air pressure of 300 kpa (gage) in the tank. if the head loss in the piping is 2 m of water, determine the discharge rate of the supply of water to the roof top in liters per second.
Answers: 3
Engineering, 04.07.2019 18:10
Calculate the bore of a cylinder that has a stroke of 18 inches and an extension time of 6 seconds at a flow rate of 4 gal/min.
Answers: 3
Engineering, 04.07.2019 18:20
Avolume of 2.65 m3 of air in a rigid, insulated container fitted with a paddle wheel is initially at 264 k, 5.6 bar. the air receives 432 kj by work from the paddle wheel. assuming the ideal gas model with cv = 0.71 kj/kg β’ k, determine for the air the amount of entropy produced, in kj/k
Answers: 2
Engineering, 04.07.2019 18:20
An engine runs on the ideal diesel cycle. the cycle has a compression ratio of 20 and a cutoff ratio of 2. the highest temperature in the cycle is 1200 k. if the heat into the system is 300 kj/kg of working fluid and using variable specific heats determine the work produced per mass of working fluid
Answers: 3
Define the overall heat transfer coefficient....
Mathematics, 23.02.2020 14:55
Mathematics, 23.02.2020 14:58
Mathematics, 23.02.2020 14:59
Chemistry, 23.02.2020 15:00
Mathematics, 23.02.2020 15:00
Mathematics, 23.02.2020 15:00
World Languages, 23.02.2020 15:00
Social Studies, 23.02.2020 15:01
Mathematics, 23.02.2020 15:03
Chemistry, 23.02.2020 15:03
Mathematics, 23.02.2020 15:20
Mathematics, 23.02.2020 15:22
Mathematics, 23.02.2020 15:23