Engineering, 20.08.2019 18:30 leslieguerrero2225
Determine the heat exchange per m² of area a, between the surface specified below if surface 1 is at 1000 k while surface 2 is at 400 k. all surfaces are black. (i) large parallel planes (ii) long coaxial cylinders of 0.5 m and 1 m dia with inner cylinder hotter. (iii) concentric spheres of 1 m and 2 m dia with inner surface hotter. (iv) parallel planes of 2 m x 2 m size placed symmetrically 1 m apart.
Answers: 2
Engineering, 04.07.2019 18:10
Thermal stresses are developed in a metal when its a) initial temperature is changed b) final temperature is changed c) density is changed d) thermal deformation is prevented e) expansion is prevented f) contraction is prevented
Answers: 2
Engineering, 04.07.2019 18:10
Draw the engineering stress-strain curve for (a) bcc; (b) fcc metals and mark important points.
Answers: 1
Engineering, 04.07.2019 19:10
What is the major difference between thermoplastics and thermosetting plastics from the polymerization structure point of view?
Answers: 2
Engineering, 04.07.2019 19:20
Apiping systems consists of 6 m of 6-std type k and 12 m of 4-std type k, both drawn copper tubing. the system conveys ethylene glycol at a rate of 0.013 m3/s. the pressure drop across the system is to be calculated. there are two 90° elbows in the 6-in pipe, a reduction from the 6-in pipe to the 4-in pipe and four 90° elbows in the 4-in pipe. all fittings are soldered (same as flanged) and regular. the inlet and outlet of the system are at the same height.
Answers: 1
Determine the heat exchange per m² of area a, between the surface specified below if surface 1 is at...
Computers and Technology, 26.11.2019 01:31