subject
Engineering, 20.08.2019 17:30 swordnewsnetwork

A50-mm-diameter, thin-walled metal pipe covered with a 25-mm-thick layer of insulation (0.085 w/m k) and carrying superheated steam at atmospheric pressure is suspended from the ceiling of a large room. the steam temperature entering the pipe is 120°c, and the air temperature in the room is 20°c. the convection heat transfer coefficient on the outer surface of the covered pipe is 10 w/m2 k. the velocity of the steam in the pipe is 10 m/s. the steam temperature at the outlet of the pipe is at tmo =106°c. 1)- calculate the temperature of the pipe’s surface at the exit of the pipe (tso) using the resistance model at the outlet of the pipe. 2)- what would happen if tmo was cooler than 106°c? note: since the degree of superheat is small (120°c is only 20°c above the saturation temperature), the vapor properties of saturated steam (gas) can be used for this problem. this would be a valid assumption. note: assume there is no condensation

ansver
Answers: 3

Another question on Engineering

question
Engineering, 03.07.2019 14:10
The y form of iron is known as: a) ferrite b) cementite c) perlite d) austenite
Answers: 3
question
Engineering, 03.07.2019 19:30
When using the ohmmeter function of a digital multimeter, the leads are placed in what position relative to the component being tested? a. parallel b. control c. series d. line
Answers: 3
question
Engineering, 04.07.2019 18:10
Condition monitoring is a major component of. (clo4) a)- predictive maintenance. b)-preventive maintenance c)-proactive maintenance d)-reactive maintenance.
Answers: 1
question
Engineering, 04.07.2019 18:20
Asimple rankine cycle uses water as the working fluid. the water enters the turbine at 10 mpa and 480c while the condenser operates at 6 kpa. if the turbine has an isentropic efficiency of 80 percent while the pump has an isentropic efficiency of 70 percent determine the thermal efficiency
Answers: 1
You know the right answer?
A50-mm-diameter, thin-walled metal pipe covered with a 25-mm-thick layer of insulation (0.085 w/m k)...
Questions
question
Mathematics, 30.11.2020 23:00
Questions on the website: 13722363