subject
Engineering, 20.08.2019 17:20 abbeygrace13

Asteam power plant operates on the rankine cycle with steam en rankine cycle with steam entering the high pressure turbine at 80 bar, 560°c with a mass flow rate of 2x10 kg/hr. the flow rate of 2x100kg/hr. the steam exits the high pressure turbine at 5 bar, 180°c where the steam is then sent back where the steam is then sent back to the boiler and reheated to 480°c before expanding through the low pressure turbine to cooling water enters the condenser from a lake at 20°c and exits at 32°c. assume the low pressure turbine has an isentropic efficiency of 92% and that the pumps opera isentropically. draw a t-s diagram of this cycle and determine the following: high pressure turbine isentropic efficiency net power output, mw low pressure turbine exit quality cycle thermal efficiency the mass flow rate of the cooling water from the lake

ansver
Answers: 1

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Ahot wire operates at a temperature of 200°c while the air temperature is 20°c. the hot wire element is a tungsten wire of 5 um diameter and 2 mm in length. plot using excel current, heat transfer and heat generated by the wire for air velocity varying from 1-10 m/s in steps of lm/s? matlab the sensor voltage output, resistance, or assume nu 0.989 re033pr13 take air properties at tr (200°c20°c)/2 = 110°c properties of tungsten: c 0.13 kj/kg.k 3 p 19250 kg/m k (thermal conductivity) = 174 w/m.k
Answers: 2
question
Engineering, 04.07.2019 18:10
Awall of 0.5m thickness is to be constructed from a material which has average thermal conductivity of 1.4 w/mk. the wall is to be insulated with a material having an average thermal conductivity of 0.35 w/mk so that heat loss per square meter shall not exceed 1450 w. assume inner wall surface temperature of 1200°c and outer surface temperature of the insulation to be 15°c. calculate the thickness of insulation required.
Answers: 3
question
Engineering, 04.07.2019 19:10
Abarometer contains mercury with a density of 13600 kg/m3. atmospheric conditions are 95.8 kpa and 20 °c at 20 °c, the vapor pressure of the mercury is 0.000173 kpa. the column of mercury will rise to a height of most nearly. select one: a)- 0.38 m b)- 0.82 m c)- 0.48 m d)- 0.72 m
Answers: 1
question
Engineering, 04.07.2019 19:10
Estimate the change in specific internal energy au and specific enthalpy h from inlet to outlet for ethylene glycol (a liquid) flowing through each of the following devices: (a) a heat exchanger where the glycol temperature increases from 20 °c to 80 °c; (b) a pump operating at about 25 °c and increasing the glycol pressure from 100 kpa to 8 mpa.
Answers: 2
You know the right answer?
Asteam power plant operates on the rankine cycle with steam en rankine cycle with steam entering the...
Questions
question
Mathematics, 06.02.2021 01:00
question
Mathematics, 06.02.2021 01:00
question
Mathematics, 06.02.2021 01:00
question
Mathematics, 06.02.2021 01:00
question
Mathematics, 06.02.2021 01:00
Questions on the website: 13722363