Abasic disc clutch is to be designed to transmit a torque of 100 lbf-in. the outer ring diameter is to be 4 inches. the values for the molded friction material are to be pmax = 200 psi and f = 0.25. find appropriate values for the ring inside radius (ri) and the clamping force (f).

oil flow is a highly convective flow compared to water flow at normal temperature and pressure.

sorry to disappoint you but i’ve been using for years and never once have i seen a “live section.” i’m sorry and i hope this !

~ emmy

answer:

I dont think you should be doing this lol, this isn´t the right spot for this

Explanation:

One of the benefits of working with chlorinated polyvinyl chloride (CPVC) pipe is that it can be cut with a variety of different tools that don’t require any electricity or heat. However, different cutting methods are preferred over others, depending on the application.

When cutting CPVC pipe, it is important to make a square, flat cut. An uneven cut limits the bonding area and weakens the fitting.

To help you make the best possible cut, we’ve put together the following dos and don’ts when cutting CPVC pipe in different situations.