Engineering, 07.08.2019 18:10 hartzpeyton136
Calculate the thermal efficiency of an otto cycle with a compression ratio or 9 using cold-air assumptions.
Answers: 2
Another question on Engineering
Engineering, 03.07.2019 15:10
Ahouse has the following electrical appliance usage (1) single 40w lamp used for 4 hours per day (2) single 60w fan used for 12 hours per day (3) single 200w refrigerator that runs 24 hours per day with compressor run 12 hours and off 12 hours find the solar power inverter size in watt with correction factor of 1.25.
Answers: 1
Engineering, 04.07.2019 18:10
The filament of an incandescent lamp has a temperature of 2000k. calculate the fraction of radiation emitted in the visible light band if the filament is approximated as blackbody
Answers: 2
Engineering, 04.07.2019 18:20
Derive the correction factor formula for conical nozzle i=-(1+ cosa) and calculate the nozzle angle correction factor for a nozzle whose divergence hal-fangle is 13 (hint: assume that all the mass flow originates at the apex of the cone.
Answers: 3
Engineering, 04.07.2019 18:20
Athin walled concentric tube exchanger is used to cool engine oil from 160°c to 60°c with water that is available at 25°c acting as a coolant. the oil and water flow rates are each at 2 kg/s, and the diameter of the inner tube is 0.5 m and the corresponding value of the overall heat transfer coefficient is 250 w/m2. oc. how long must the heat exchanger be to accomplish the desired cooling? cpwater=4.187 kj/kg-candcpengine el=2.035 kj/kg·°c, oil . 120]
Answers: 1
You know the right answer?
Calculate the thermal efficiency of an otto cycle with a compression ratio or 9 using cold-air assum...
Questions
Mathematics, 17.12.2021 02:20
Mathematics, 17.12.2021 02:20
Mathematics, 17.12.2021 02:20
Social Studies, 17.12.2021 02:20
Computers and Technology, 17.12.2021 02:20
Mathematics, 17.12.2021 02:20
Computers and Technology, 17.12.2021 02:20
Social Studies, 17.12.2021 02:20
