Engineering, 07.08.2019 04:30 nila49
Alow-carbon steel was found to follow o= (717 mpa)e^0.234. if the initial diameter was 12.8 mm and was reached duing the tensile test of this steel. 4, the diameter at fracture was 9.27 mm, calculate the maximum tensile load (kn) that during the tensile test of this steel.
Answers: 2
Engineering, 04.07.2019 18:10
Slip occurs via two partial dislocations because of (a) the shorter path of the partial dislocation lines; (b) the lower energy state through partial dislocations; (c) the charge balance.
Answers: 1
Engineering, 04.07.2019 18:10
A-mn has a cubic structure with a0 0.8931 nm and a density of 7.47 g/cm3. b-mn has a different cubic structure, with a0 0.6326 nm and a density of 7.26 g/cm3. the atomic weight of manganese is 54.938 g/mol and the atomic radius is 0.112 nm. determine the percent volume change that would occur if a-mn transforms to b-mn.
Answers: 2
Engineering, 04.07.2019 18:20
Inadequate stores control is not an obstacle to effective work order system. (clo4) a)-true b)-false
Answers: 3
Engineering, 04.07.2019 18:20
What is the heat treatment of metals? what is the benefit of it? why and how it's useful? answer in details, do not write by hand.
Answers: 3
Alow-carbon steel was found to follow o= (717 mpa)e^0.234. if the initial diameter was 12.8 mm and w...
Chemistry, 25.03.2022 07:20
Advanced Placement (AP), 25.03.2022 07:30
Health, 25.03.2022 07:40
Business, 25.03.2022 08:00
English, 25.03.2022 08:00
Mathematics, 25.03.2022 08:10
Mathematics, 25.03.2022 08:20
Social Studies, 25.03.2022 08:30
History, 25.03.2022 08:30
Mathematics, 25.03.2022 08:40
Mathematics, 25.03.2022 09:10
English, 25.03.2022 14:00
Computers and Technology, 25.03.2022 14:00