Engineering, 06.08.2019 01:30 hnsanders00
Refer to the triaxial test on the clay specimen in problem 12.6. a. what is the inclination of the failure plane with the major principal plane? b. determine the normal and shear stress on a plane inclined at 30° with the major principal plane at failure. also explain why the specimen did not fail along this plane.
Answers: 3
Engineering, 03.07.2019 14:10
Explain the difference laminar and turbulent flow. explain it with the shear stress and the velocity profiles.
Answers: 1
Engineering, 03.07.2019 14:10
When at a point two solid phase changes to one solid phase on cooling then it is known as a) eutectoid point b) eutectic point c) peritectic point d) peritectoid point
Answers: 3
Engineering, 04.07.2019 18:10
Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.
Answers: 1
Engineering, 04.07.2019 18:20
Select any two (2) areas of applications of chain-drive. (clo4) a)-permanent lubrication necessary b)-hydraulic forklift truck operation c)-rigging and heavy moving materials d)-relatively high maintenance costs e)-costlier than belt drives
Answers: 2
Refer to the triaxial test on the clay specimen in problem 12.6. a. what is the inclination of the f...
Computers and Technology, 12.02.2021 01:00
History, 12.02.2021 01:00
Mathematics, 12.02.2021 01:00
Mathematics, 12.02.2021 01:00
Mathematics, 12.02.2021 01:00
History, 12.02.2021 01:00
Mathematics, 12.02.2021 01:00
Mathematics, 12.02.2021 01:00
Mathematics, 12.02.2021 01:00
Mathematics, 12.02.2021 01:00
History, 12.02.2021 01:00