Which one of the following is not a possible output device for an ecm?
(a) radiator fan relay (b) fuel pump relay (c) ignition module (d) egr solen
(e) transmission control solenoid (f) throttle position variable resistor
(g) ignition coils (h) air injection diverter valve solenoid
(1) malfunction indicator light.

Along steel shaft of 10 cm diameter is austenised at 870°c and then quenched in a liquid at 30oc. the average surface heat transfer coefficient is 2000 w/m2. °c. the relevant thermophysical properties of the shaft are: p=7800 kg/m", k=20 w/mk, cp=0.46 kj/kg.k calculate: a)-the time required for the center temperature to drop to 200°c. b)-the temperature at half-radius at that moment. c)-the amount of heat that had been transferred to the liquid by that time per meter length of the shaft