Engineering, 02.08.2019 19:20 lovly8914

A4-m-high and 6-m-wide wall consists of a long 18-cm×30-cm cross section of horizontal bricks (k=0.72w/m°c) separated by 3-cm-thick plaster layers (k=0.22w/m°c). there are also 2-cm-thick plaster layers on each side of the wall, and a 2-cm-thick rigid foam (k=0.026w/m°c) on the inner side of the wall. the indoor and the outdoor temperatures are 22°c and -4°c, and the convection heat transfer coefficients on the inner and the outer sides are h1=10w/m^2°c and h2=20w/m^2°c, respectively. assuming onedimensional heat transfer and disregarding radiation, determine the rate of heat transfer through the wall.

Answers: 3

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Apump is used to circulate hot water in a home heating system. water enters the well-insulated pump operating at steady state at a rate of 0.42 gal/min. the inlet pressure and temperature are 14.7 lbf/in.2, and 180°f, respectively; at the exit the pressure is 60 lbf/in.2 the pump requires 1/15 hp of power input. water can be modeled as an incompressible substance with constant density of 60.58 lb/ft3 and constant specific heat of 1 btu/lb or. neglecting kinetic and potential energy effects, determine the temperature change, in °r, as the water flows through the pump.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Shafts are machine elements that are used to a) carry axial loads b) direct shear loads c) transmit power d) rotate at constant speed e) none of the above circular and square shafts subjected to the same torque under the same circum behave a) the same way b) almost the same way

Answers: 2

Answer

Engineering, 04.07.2019 18:20

Prove the equivalence between the two statements of the 2nd law of thermodynamics (i.e., a violation of one statement leads to the violatio the other statement)

Answers: 2

Answer

Engineering, 06.07.2019 03:10

Asolid steel sphere (k=63.9 w m-1 k-1 , ? =7832 kg m-3 , c=0.523 kj kg-1 k-1 ), 100 mm in diameter is initially at a uniform temperature of 500o c and is suddenly quenched in a large oil bath for which t? = 100o c and h = 3200 w m-2 k-1. estimate the time required for the sphere to cool to 200o c and to 110o c

Answers: 1

Answer

You know the right answer?

A4-m-high and 6-m-wide wall consists of a long 18-cm×30-cm cross section of horizontal bricks (k=0.7...

Questions