Engineering, 26.07.2019 18:10 mimi8561
Helium is contained in a rigid tank. (a) if it is heated from 300°c to 350°c, what is the specific entropy increase? (b) what is the specific entropy increase if it is heated from 1300°c to 1350°c?
Answers: 1
Engineering, 04.07.2019 18:10
Aflywheel accelerates for 5 seconds at 2 rad/s2 from a speed of 20 rpm. determine the total number of revolutions of the flywheel during the period of its acceleration. a.5.65 b.8.43 c. 723 d.6.86
Answers: 2
Engineering, 04.07.2019 18:10
Aplate clutch has a single pair of mating friction surfaces 250-mm od by 175-mm id. the mean value of the coefficient of friction is 0.30, and the actuating force is 4 kn. a) find the maximum pressure and the torque capacity using the uniform-wear model. b) find the maximum pressure and the torque capacity using the uniform-pressure model.
Answers: 3
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
Engineering, 04.07.2019 18:20
Steam enters a converging nozzle at 3.0 mpa and 500°c with a at 1.8 mpa. for a nozzle exit area of 32 cm2, determine the exit velocity, mass flow rate, and exit mach number if the nozzle: negligible velocity, and it exits (a) is isentropic (b) has an efficiency of 94 percent
Answers: 2
Helium is contained in a rigid tank. (a) if it is heated from 300°c to 350°c, what is the specific e...
Mathematics, 25.02.2021 19:50
Mathematics, 25.02.2021 19:50
Mathematics, 25.02.2021 19:50
Physics, 25.02.2021 19:50
Mathematics, 25.02.2021 19:50
French, 25.02.2021 19:50
Mathematics, 25.02.2021 19:50