Engineering, 26.07.2019 17:20 ayeeitsenaly4175
Define the following terms. a drawing with the terms labeled would also be where appropriate. a. pitch circle/pitch diameter b. pinion/gear c. base circle d. diametral pitch e. interference
Answers: 2
Engineering, 04.07.2019 18:10
Aflywheel accelerates for 5 seconds at 2 rad/s2 from a speed of 20 rpm. determine the total number of revolutions of the flywheel during the period of its acceleration. a.5.65 b.8.43 c. 723 d.6.86
Answers: 2
Engineering, 04.07.2019 18:10
Afluid flows with a velocity field given by v=(x/t)i.. determine the local and convective accelerations when x=3 and t=1.
Answers: 2
Engineering, 04.07.2019 18:10
Adouble-strand no. 60 roller chain is used to transmit power between a 13-tooth driving sprocket rotating at 300 rev/min and a 52-tooth driven sprocket. a) what is the allowable horsepower of this drive? b) estimate the center-to-center distance if the chain length is 82 pitches. c) estimate the torque and bending force on the driving shaft by the chain if the actual horsepower transmitted is 30 percent less than the corrected (allowable) power.
Answers: 3
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
Define the following terms. a drawing with the terms labeled would also be where appropriate. a. pi...
Geography, 23.09.2019 21:30
Biology, 23.09.2019 21:30
History, 23.09.2019 21:30
History, 23.09.2019 21:30
Business, 23.09.2019 21:30
Mathematics, 23.09.2019 21:30
Social Studies, 23.09.2019 21:30
Biology, 23.09.2019 21:30
Health, 23.09.2019 21:30
Mathematics, 23.09.2019 21:30
Biology, 23.09.2019 21:30
History, 23.09.2019 21:30
Computers and Technology, 23.09.2019 21:30
Mathematics, 23.09.2019 21:30
History, 23.09.2019 21:30