Engineering, 26.07.2019 16:10 rbalexander25
A200 kg machine is mounted on an isolator of stiffness 4x10 n/m and assumed damping ratio of 0.06. what is the amplitude of the force transmitted to the foundation through the isolator if the machine has a rotating unbalance of magnitude 0.25 kg-m and operates at 550 rpm? is this isolator a good choice?
Answers: 2
Another question on Engineering
Engineering, 04.07.2019 18:10
An ideal otto cycle with air as the working fluid has a compression ratio of 8. the minimum and maximum temperatures in the cycle are 300 k and 1340 k. use constant specific heats at room temperature to determine (a) the amount of heat transferred to the air during the heat- addition kj/kg, (b) the thermal efficiency, and (c) the thermal efficiency of a carnot cycle ope limits. process, in rating between the same temperature
Answers: 2
Engineering, 04.07.2019 19:10
Asteel wire of 2 mm diameter is fixed between two points located 2 m apart. the tensile force in the wire is 250n, if its density of steel is given by 7830 kg/m3 the fundamental frequency of vibration hz? ?
Answers: 3
Engineering, 04.07.2019 19:10
Plan an experiment to measure the surface tension of a liquid similar to water. if necessary, review the ncfmf video surface tension for ideas. which method would be most suitable for use in an undergraduate laboratory? what experimental precision could be expected?
Answers: 2
Engineering, 06.07.2019 02:30
In a unit cell of fcc structure, indicate the position of one of the tetrahedral interstitial sites by plotting the corresponding tetrahedron. do the same for one of the octahedral interstitial sites (in a separate fcc unit cell). mark the positions of all the tetrahedral and octahedral interstitial sites in the unit cells. how many equivalent tetrahedral sites and how many equivalent octahedral sites are contained in a fcc unit cell, respectively. what is the coordination number for a tetrahedral site and what is the coordination number for an octahedral site?
Answers: 2
You know the right answer?
A200 kg machine is mounted on an isolator of stiffness 4x10 n/m and assumed damping ratio of 0.06. w...
Questions
Mathematics, 05.07.2020 17:01
Mathematics, 05.07.2020 17:01
Social Studies, 05.07.2020 17:01
Mathematics, 05.07.2020 17:01
Biology, 05.07.2020 17:01
