Engineering, 20.07.2019 03:30 ABRANLINLCON
What are the general principles of dfa? what are the steps to minimize the number of parts for an assembly?
Answers: 1
Engineering, 04.07.2019 18:10
Abrake has a normal braking torque of 2.8 kip in and heat-dissipating cast-iron surfaces whose mass is 40 lbm. suppose a load is brought to rest in 8.0 s from an initial angular speed of 1600 rev/min using the normal braking torque; estimate the temperature rise of the heat dissipating surfaces.
Answers: 3
Engineering, 04.07.2019 18:10
The higher the astm grain-size number, the coarser the grain is. a)-true b)-false
Answers: 3
Engineering, 04.07.2019 18:10
Which one from below is not one of the reasons of planning failures? (clo3) a)-planner is careless. b-planner spend less time in the field but more time on the desk c)-planner is not qualified d)-planner does not have sufficient time to properly plan
Answers: 3
Engineering, 04.07.2019 19:10
Afoot bridge is made as a simple deck, 4 m long, with a cross section 2 m (wide) and 20 cm thick, and made of wood. the deck is supported at the two ends. the maximum load allowable on the bridge is 10 tons, provided it is uniformly distributed on the deck. to sense this load, a strain gauge is placed at the center of the bridge and its resistance is monitored. if the sensor has a nominal resistance of 350 s2 and a gauge factor of 3.6, what is the reading of the strain gauge at maximum load? the modulus of elasticity for the wood used in the construction is 10 gpa.
Answers: 2
What are the general principles of dfa? what are the steps to minimize the number of parts for an a...
History, 04.03.2020 03:01
Mathematics, 04.03.2020 03:01
Mathematics, 04.03.2020 03:01
Mathematics, 04.03.2020 03:01
English, 04.03.2020 03:01
Mathematics, 04.03.2020 03:01
Chemistry, 04.03.2020 03:01
Mathematics, 04.03.2020 03:01
Biology, 04.03.2020 03:01
Biology, 04.03.2020 03:02