subject
Engineering, 19.07.2019 04:20 kyronthomas52

Which one of the following coating processes is best sulted to produce stablized airconia (zro2) coasings (ceramic) tor thermal insulation compressor blades in turbine engines? a)-flame spraying b)- vacuum evaporation c)-plasma spraying d)- diffusion e)anodizing

ansver
Answers: 3

Another question on Engineering

question
Engineering, 04.07.2019 18:20
How much power could a wind turbine produce if it had the following specifications? cp = 0.45 -d=1.2kg/m3 d=50m v 5m/s
Answers: 2
question
Engineering, 04.07.2019 19:20
Apreheater involves the use of condensing steam at 100°c on the inside of a bank of tubes to heat air that enters at 1 atm and 25°c. the air moves at 5 m/s in cross flow over the tubes. each tube is 1 m long and has an outside diameter of 10 mm. what is the minimum value of nl needed to achieve an outlet temperature of t 75 c? what is the corresponding pressure drop across the tube bank?
Answers: 3
question
Engineering, 06.07.2019 04:10
An inventor claims to have developed a reversed heat engine (ie. a heat pump) which is able to deliver 10 kj heat into the room at 20°c from outside ambient temperature of -10°c by consuming only 2 kj electricity in winter. this claim is a)-impossible b)-possible only if the heat pump is ideal c)-practically possible d)-unable to be assessed as it depends on the working fluid used in the heat pump.
Answers: 2
question
Engineering, 06.07.2019 04:10
Amixture of gases consists of 0.4 kg of oxygen, 0.7 kg of carbon dioxide, and 0.2 kg of helium this mixture is maintained at 100 kpa and 27°c. determine: (a) the apparent molecular weight of this mixture the volume it occupies (b) the partial volume of the oxygen, and (c) (d) the partial pressure of the helium
Answers: 1
You know the right answer?
Which one of the following coating processes is best sulted to produce stablized airconia (zro2) coa...
Questions
question
Mathematics, 24.09.2019 07:30
Questions on the website: 13722363