subject
Engineering, 19.07.2019 00:30 deena7

Two masses of 14,5 kg and 17,91 kg respectively are firmly attached to a rotating faceplate on a lathe. the 14,5 kg mass is attached at a radius of 91 mm and 17,91 kg mass at a radius of 101 mm from the centre o. the eccentricities of the 14,5 kg mass and the 17,91 kg mass are at an angle of 120° to one another. determine the distance where a 15 kg mass must be placed to balance the system

ansver
Answers: 1

Another question on Engineering

question
Engineering, 03.07.2019 15:10
If you were designing a bumper for a car, would you prefer it to exhibit elastic or plastic deformation? why? consider the functions of a bumper in both a minor "fender-bender" and a major collision.
Answers: 1
question
Engineering, 04.07.2019 18:10
Acompressor receives the shaft work to decrease the pressure of the fluid. a)- true b)- false
Answers: 3
question
Engineering, 04.07.2019 18:10
An air compression refrigeration system is to have an air pressure of 100 psia in the brine tank and an allowable air temperature increase of 60°f for standard vapor compression cycle temperatures of 77 f entering the expansion cylinder and 14 f entering the compression cylinder, calculate the coefficient of performance a. 2.5 b 3.3 c. 4.0 d. 5.0
Answers: 3
question
Engineering, 04.07.2019 18:20
Asolid cylinder is concentric with a straight pipe. the cylinder is 0.5 m long and has an outside diameter of 8 cm. the pipe has an inside diameter of 8.5 cm. the annulus between the cylinder ad the pipe contains stationary oil. the oil has a specific gravity of 0.92 and a kinematic viscosity of 5.57 x 10-4 m2/s. most nearly, what is the force needed to move the cylinder along the pipe at a constant velocity of 1 m/s?
Answers: 3
You know the right answer?
Two masses of 14,5 kg and 17,91 kg respectively are firmly attached to a rotating faceplate on a lat...
Questions
question
Business, 11.10.2019 14:50
Questions on the website: 13722367