Engineering, 18.07.2019 04:10 jamesmarsdel
During which stage of annealing would we expect the dislocation density to drop significantly resulting in a reduction in strength and increase in ductility? a) recovery b) recrystallization c) grain growth d) precipitation e) none of these
Answers: 1
Engineering, 04.07.2019 18:10
An air conditioning system consist of a 5 cm diameter pipe, operating at a pressure of 200 kpa. the air initially enters the pipe at 15°c with a velocity of 20 m/s and relative humidity of 80%. if the heat supply throughout the process is 960 w, determine the relative humidity and the temperature at the outlet
Answers: 3
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
Engineering, 04.07.2019 19:10
Arigid tank contains 10 kg of air at 137 kpa (abs) and 21°c. more air is added to the tank until the pressure and temperature rise to 242 kpa (abs) and 32°c, respectively. determine the amount of air added to the tank. [r-0.287 kj/kg k]
Answers: 3
Engineering, 04.07.2019 19:20
Heat transfer by is the fastest mode of heat transfer that requires no intervening medium. a)-conduction b)-convection c)-radiation d)-conduction and convection
Answers: 1
During which stage of annealing would we expect the dislocation density to drop significantly result...
Mathematics, 07.12.2020 04:30
Health, 07.12.2020 04:30
History, 07.12.2020 04:30
English, 07.12.2020 04:30
Biology, 07.12.2020 04:30
History, 07.12.2020 04:30
History, 07.12.2020 04:30
Mathematics, 07.12.2020 04:30
Social Studies, 07.12.2020 04:30
SAT, 07.12.2020 04:30
English, 07.12.2020 04:30
Mathematics, 07.12.2020 04:30