Engineering, 17.07.2019 20:10 nuna37
A3-in. diameter low-strength, stainless-steel cylindrical part is to be turned on a lathe at 600 rpm, with a depth-of-cut of 0.2-in. and a feed of 0.025 in./rev. what should be the minimum horsepower of the lathe?
Answers: 2
Engineering, 04.07.2019 18:10
Air is to be cooled in the evaporator section of a refrigerator by passing it over a bank of 0.8-cm-outer-diameter and 0.4-m-long tubes inside which the refrigerant is evaporating at -20°c. air approaches the tube bank in the normal direction at 0°c and 1 atm with a mean velocity of 4 m/s. the tubes are arranged in-line with longitudinal and transverse pitches of sl- st 1.5 cm. there are 30 rows in the flow direction with 15 tubes in each row. determine (a) the refrigeration capacity of this system and (b) pressure drop across the tube bank. evaluate the air properties at an assumed mean temperature of -5°c and 1 atm. is this a good assumption?
Answers: 1
Engineering, 04.07.2019 18:10
Which one from below is not one of the reasons of planning failures? (clo3) a)-planner is careless. b-planner spend less time in the field but more time on the desk c)-planner is not qualified d)-planner does not have sufficient time to properly plan
Answers: 3
Engineering, 04.07.2019 18:10
What are the two (02) benefits, which may result from a successful implementation of preventive maintenance (pm) program in an organization? (clo3)a)- lean manufacturing b)-overlapping responsibilities c)-the planner is not qualified d)-accurate contractor information e)-reduction in equipment redundancies f)-accurate stores information
Answers: 3
Engineering, 04.07.2019 18:20
Steam enters a converging nozzle at 3.0 mpa and 500°c with a at 1.8 mpa. for a nozzle exit area of 32 cm2, determine the exit velocity, mass flow rate, and exit mach number if the nozzle: negligible velocity, and it exits (a) is isentropic (b) has an efficiency of 94 percent
Answers: 2
A3-in. diameter low-strength, stainless-steel cylindrical part is to be turned on a lathe at 600 rpm...
Advanced Placement (AP), 13.08.2021 21:30
Health, 13.08.2021 21:40
Mathematics, 13.08.2021 21:40
Arts, 13.08.2021 21:40
Mathematics, 13.08.2021 21:40
Mathematics, 13.08.2021 21:40
Mathematics, 13.08.2021 21:40
Mathematics, 13.08.2021 21:40
Mathematics, 13.08.2021 21:40
Chemistry, 13.08.2021 21:40
Mathematics, 13.08.2021 21:40
Mathematics, 13.08.2021 21:40