Engineering, 13.07.2019 19:10 Lovelybunny321
Oil with a density of 800 kg/m3 is pumped from a pressure of 0.6 bar to a pressure of 1.4 bar, and the outlet is 3 m above the inlet. the volumetric flow rate is 0.2 m3/s, and the inlet and exit areas are 0.06 m2 and 0.03 m3, respectively. (a) assuming the temperature to remain constant and neglecting any heat transfer, determine the power input to the pump in kw. (b) what-if scenario: what would the necessary power input be if the change in ke were neglected in the analysis? ?
Answers: 1
Another question on Engineering
Engineering, 03.07.2019 14:10
Explain the difference laminar and turbulent flow. explain it with the shear stress and the velocity profiles.
Answers: 1
Engineering, 03.07.2019 14:10
When at a point two solid phase changes to one solid phase on cooling then it is known as a) eutectoid point b) eutectic point c) peritectic point d) peritectoid point
Answers: 3
Engineering, 03.07.2019 14:10
If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.
Answers: 3
Engineering, 03.07.2019 15:10
Ahouse has the following electrical appliance usage (1) single 40w lamp used for 4 hours per day (2) single 60w fan used for 12 hours per day (3) single 200w refrigerator that runs 24 hours per day with compressor run 12 hours and off 12 hours find the solar power inverter size in watt with correction factor of 1.25.
Answers: 1
You know the right answer?
Oil with a density of 800 kg/m3 is pumped from a pressure of 0.6 bar to a pressure of 1.4 bar, and t...
Questions
English, 12.10.2020 14:01
Mathematics, 12.10.2020 14:01
History, 12.10.2020 14:01
Mathematics, 12.10.2020 14:01
Chemistry, 12.10.2020 14:01
Mathematics, 12.10.2020 14:01
Mathematics, 12.10.2020 14:01
English, 12.10.2020 14:01
Physics, 12.10.2020 14:01
Chemistry, 12.10.2020 14:01
