Ascrew jack is used horizontally in sliding a bedplate into position on its foundation. the plate has a mass of 4 t and u between it and the foundation is 0.25. the screw of the jack has a mean diameter of 50mm and a pitch of 12mm; ? = 0.15. the axial thrust is carried on a collar of mean diameter 68 mm for which ? 0.15. determine the torque required on the jack and the efficiency of the operation.

Explain the difference laminar and turbulent flow. explain it with the shear stress and the velocity profiles.

Afour cylinder four-stroke in-line engine has a stroke of 160mm, connecting rod length of 150mm, a reciprocating mass of 3kg and its firing order is 1-3-4-2. the spacing between cylinders is 100mm. i. show that the engine is in balance with regard to the primary inertia forces and primary 3. a and secondary inertia couples. li determine the out of balance secondary inertia force ii. propose ways of balancing this out of balance force and discuss the challenges that will arise

Asolid cylinder is concentric with a straight pipe. the cylinder is 0.5 m long and has an outside diameter of 8 cm. the pipe has an inside diameter of 8.5 cm. the annulus between the cylinder ad the pipe contains stationary oil. the oil has a specific gravity of 0.92 and a kinematic viscosity of 5.57 x 10-4 m2/s. most nearly, what is the force needed to move the cylinder along the pipe at a constant velocity of 1 m/s?