Engineering, 11.07.2019 04:30 Carrchris021
Gasoline flows in a smooth pipe with a 40 cm diameter at a rate of 0.001 m3/s. if it were possible to prevent turbulence from occuring, what would be the ratio of head losses for the actual turbulent flow compared to that if it were laminar?
Answers: 3
Engineering, 03.07.2019 14:10
Explain the difference laminar and turbulent flow. explain it with the shear stress and the velocity profiles.
Answers: 1
Engineering, 03.07.2019 15:10
Heat is added to a piston-cylinder device filled with 2 kg of air to raise its temperature 400 c from an initial temperature of t1 27 cand pressure of pi 1 mpa. the process is isobaric process. find a)-the final pressure p2 b)-the heat transfer to the air.
Answers: 1
Engineering, 04.07.2019 18:10
Consider a large isothermal enclosure that is maintained at a uniform temperature of 2000 k. calculate the emissive power of the radiation that emerges from a small aperture on the enclosure surface. what is the wavelength ? , below which 10% of the emission is concentrated? what is the wavelength ? 2 above which 10% of the emission is concentrated? determine the wavelength at which maximum spectral emissive power occurs. what is the irradiation incident on a small object placed inside the enclosure?
Answers: 2
Engineering, 04.07.2019 18:20
Apiston-cylinder device contains 0.1 m3 of liquid water and 0.9 m3 of water vapor in equilibrium at 800 kpa. heat is transferred at constant pressure until the temperature of water reaches 350 °c. determine (a) the quality of water at the initial state (b) the work associated with this process, (c) the heat associated with this process.
Answers: 2
Gasoline flows in a smooth pipe with a 40 cm diameter at a rate of 0.001 m3/s. if it were possible t...
Social Studies, 25.03.2020 21:23
Mathematics, 25.03.2020 21:23
English, 25.03.2020 21:23
Mathematics, 25.03.2020 21:23