Engineering, 11.07.2019 04:30 bobtothemaxthe1st
Ashaft made of stainless steel has an outside diameter of 42 mm and a wall thickness of 4 mm. determine the maximum torque t that may be applied to the shaft if the allowable shear stress is equal to 100 mpa.
Answers: 2
Engineering, 04.07.2019 03:10
What precautions should you take to prevent injuries when dealing with heavy loads?
Answers: 1
Engineering, 04.07.2019 18:10
Abrake has a normal braking torque of 2.8 kip in and heat-dissipating cast-iron surfaces whose mass is 40 lbm. suppose a load is brought to rest in 8.0 s from an initial angular speed of 1600 rev/min using the normal braking torque; estimate the temperature rise of the heat dissipating surfaces.
Answers: 3
Engineering, 04.07.2019 18:10
Manometers are good examples of measuring instruments, nowadays they are not as common as before. a)-capacitive probe gauges b)-gravitational gauges deformation ) gauges d)-digital gauges
Answers: 1
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
Ashaft made of stainless steel has an outside diameter of 42 mm and a wall thickness of 4 mm. determ...
Mathematics, 14.04.2021 15:20
Mathematics, 14.04.2021 15:20
Mathematics, 14.04.2021 15:20
Mathematics, 14.04.2021 15:20
History, 14.04.2021 15:20
Mathematics, 14.04.2021 15:20
English, 14.04.2021 15:20
Mathematics, 14.04.2021 15:20
Mathematics, 14.04.2021 15:20
English, 14.04.2021 15:20
Mathematics, 14.04.2021 15:20
Social Studies, 14.04.2021 15:20
Chemistry, 14.04.2021 15:20