Engineering, 11.07.2019 04:30 tay8568
Water is released from a water tank through a pipe to the atmosphere. the pipe diameter is 8 mm and the length is 6 m. water temperature is 15°c. the resistance coefficient of the pipe f = 0.015 and the difference between the water surface and the pipe outlet is 3 m. determine the exit velocity of water and sketch the hydraulic grade line (hgl) and energy grade line (egl) along the pipe. assume that minor loss can be ignore but not the major loss.
Answers: 1
Another question on Engineering
Engineering, 04.07.2019 18:10
Adouble-strand no. 60 roller chain is used to transmit power between a 13-tooth driving sprocket rotating at 300 rev/min and a 52-tooth driven sprocket. a) what is the allowable horsepower of this drive? b) estimate the center-to-center distance if the chain length is 82 pitches. c) estimate the torque and bending force on the driving shaft by the chain if the actual horsepower transmitted is 30 percent less than the corrected (allowable) power.
Answers: 3
Engineering, 04.07.2019 18:10
Thermal stresses are developed in a metal when its a) initial temperature is changed b) final temperature is changed c) density is changed d) thermal deformation is prevented e) expansion is prevented f) contraction is prevented
Answers: 2
Engineering, 04.07.2019 18:10
Slip occurs via two partial dislocations because of (a) the shorter path of the partial dislocation lines; (b) the lower energy state through partial dislocations; (c) the charge balance.
Answers: 1
Engineering, 04.07.2019 18:10
Calculate the bore of a cylinder that has a stroke of 18 inches and an extension time of 6 seconds at a flow rate of 4 gal/min.
Answers: 3
You know the right answer?
Water is released from a water tank through a pipe to the atmosphere. the pipe diameter is 8 mm and...
Questions
