Engineering, 11.07.2019 04:20 mzyjohnson47
One end of a very long aluminum rod (k= 200 w/m. c) with a diameter of 5 mm is kept at 130 c. if the ambient temperature surrounding the rod, t? is at 30 c and the heat transfer coefficient, h is 120 w/m2 .c. find: a. the temperature distribution in the rod. b. the rate of heat transfer from the rod. c. find what the actual length of the rod must be in order for the infinite length assumption to represent an accurate model d. if instead of aluminum, stainless steel (k= 15 w/m. c) is used would the actual length noted in part c for an accurate infinite length model be higher or lower than what was calculated in part b.
Answers: 1
Engineering, 04.07.2019 18:10
Determine whether or not it is possible to compress air adiabatically from k to 140 kpa and 400 k. what is the entropy change during this process?
Answers: 3
Engineering, 04.07.2019 18:10
Condition monitoring is a major component of. (clo4) a)- predictive maintenance. b)-preventive maintenance c)-proactive maintenance d)-reactive maintenance.
Answers: 1
Engineering, 04.07.2019 18:20
Select any two (2) areas of applications of chain-drive. (clo4) a)-permanent lubrication necessary b)-hydraulic forklift truck operation c)-rigging and heavy moving materials d)-relatively high maintenance costs e)-costlier than belt drives
Answers: 2
Engineering, 04.07.2019 19:10
What is the chief metrological difference between measuring with a microscope and with an electronic comparator? a. the microscope is limited to small workpieces.a. the microscope is limited to small workpieces. c. the comparator can only examine one point on the workpiece. d. the microscope carries its own standard.
Answers: 1
One end of a very long aluminum rod (k= 200 w/m. c) with a diameter of 5 mm is kept at 130 c. if the...
Geography, 27.09.2019 18:00
Biology, 27.09.2019 18:00
Mathematics, 27.09.2019 18:00
Geography, 27.09.2019 18:00
English, 27.09.2019 18:00