subject
Engineering, 11.07.2019 04:20 dpazmembreno

Two large plane surfaces are 2.8 cm apart. the space between the surfaces is filled with glycerine. what force is required to drag a very thin plate of surface area of 0.6 m^2 between the two large plane surfaces at a speed of 1.5 m/s, if (i) the thin plate is in the middle of the two plane surfaces, and (ii) the thin plate is at a distance of 0.7 cm from one of the plane surfaces? assume the kinematic viscosity ofglycerine is 1.19×10^-3 m^2/s

ansver
Answers: 3

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Refrigerant 134a enters an insulated compressor operating at steady state as saturated vapor at -26°c with a volumetric flow rate of 0.18 m3/s. refrigerant exits at 9 bar, 70°c. changes in kinetic and potential energy from inlet to exit can be ignored. determine the volumetric flow rate at the exit, in m3/s, and the compressor power, in kw.
Answers: 1
question
Engineering, 04.07.2019 18:10
Water in a partially filled large tank is to be supplied to the roof top, which is 8 m above the water level in the tank, through a 2.2-cm-internal-diameter pipe by maintaining a constant air pressure of 300 kpa (gage) in the tank. if the head loss in the piping is 2 m of water, determine the discharge rate of the supply of water to the roof top in liters per second.
Answers: 3
question
Engineering, 04.07.2019 18:10
Draw the engineering stress-strain curve for (a) bcc; (b) fcc metals and mark important points.
Answers: 1
question
Engineering, 04.07.2019 18:20
Acertain flow of air (at stp) has a velocity distribution given by v i (in ft/s). if this flow is going through a 4 ft square area in the yz-plane (centered at the origin), what is the mass flow rate (in lbm/s)?
Answers: 2
You know the right answer?
Two large plane surfaces are 2.8 cm apart. the space between the surfaces is filled with glycerine....
Questions
question
Mathematics, 30.06.2019 05:00
Questions on the website: 13722363