Engineering, 11.07.2019 04:10 Deascry
In the si system of units, the absolute temperature is measured to be 303 k its value in fahrenheit is a-) 76 f b)- 86f c)-79 f d)- 82 f
Answers: 2
× (K-273) +32
Another question on Engineering
Engineering, 04.07.2019 16:10
An electrical motor raises a 50kg load at a construct velencity .calculate the power of the motor, if it takes 40sec to raise the load through a height of 24m(take g =9.8n/g)
Answers: 2
Engineering, 04.07.2019 18:10
The higher the astm grain size number, the finer the gran is. a)-true b)-false
Answers: 2
Engineering, 04.07.2019 18:10
Calculate the bore of a cylinder that has a stroke of 18 inches and an extension time of 6 seconds at a flow rate of 4 gal/min.
Answers: 3
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
You know the right answer?
In the si system of units, the absolute temperature is measured to be 303 k its value in fahrenheit...
Questions
Mathematics, 12.02.2021 14:00
Chemistry, 12.02.2021 14:00
Mathematics, 12.02.2021 14:00
Mathematics, 12.02.2021 14:00
Mathematics, 12.02.2021 14:00
English, 12.02.2021 14:00
Mathematics, 12.02.2021 14:00
Mathematics, 12.02.2021 14:00
Advanced Placement (AP), 12.02.2021 14:00
English, 12.02.2021 14:00
