Engineering, 11.07.2019 02:30 shusemann
Asteel pipe (k=45.0 w/m-k) having a 5.0 cm o. d. is covered with a 4.2 cm thick layer of magnesia (k=0.07 w/m-k) which is in turn covered with a 2.4 cm layer of fiberglass insulation ((k= 0.048 w/m-k). the pipe wall outside temperature is 370k and the outside surface temperature of the fiber galss is 305k. what is the interfacial temperature between the magnesia and the fiberglass?
Answers: 3
Another question on Engineering
Engineering, 03.07.2019 14:10
If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.
Answers: 3
Engineering, 03.07.2019 15:10
Two flowing streams of argon gas are adiabatically mixed to form a single flow/stream. one stream is 1.5 kg/s at 400 kpa and 200 c while the second stream is 2kg/s at 500 kpa and 100 ? . it is stated that the exit state of the mixed single flow of argon gas is 150 c and 300 kpa. assuming there is no work output or input during the mixing process, does this process violate either the first or the second law or both? explain and state all your assumptions.
Answers: 1
Engineering, 04.07.2019 18:10
Steel is coated with a thin layer of ceramic to protect against corrosion. what do you expect to happen to the coating when the temperature of the steel is increased significantly? explain.
Answers: 1
Engineering, 04.07.2019 18:10
Afour cylinder four-stroke in-line engine has a stroke of 160mm, connecting rod length of 150mm, a reciprocating mass of 3kg and its firing order is 1-3-4-2. the spacing between cylinders is 100mm. i. show that the engine is in balance with regard to the primary inertia forces and primary 3. a and secondary inertia couples. li determine the out of balance secondary inertia force ii. propose ways of balancing this out of balance force and discuss the challenges that will arise
Answers: 3
You know the right answer?
Asteel pipe (k=45.0 w/m-k) having a 5.0 cm o. d. is covered with a 4.2 cm thick layer of magnesia (k...
Questions
History, 10.11.2019 14:31
Mathematics, 10.11.2019 14:31
Mathematics, 10.11.2019 14:31
Mathematics, 10.11.2019 14:31
English, 10.11.2019 14:31
Mathematics, 10.11.2019 14:31
Social Studies, 10.11.2019 14:31
Social Studies, 10.11.2019 14:31
Mathematics, 10.11.2019 14:31
Social Studies, 10.11.2019 14:31
