Engineering, 06.07.2019 05:20 Shihhschool20

An industrial centrifugal air compressor has 34 radial blades that has no pre-whirl. the tip speed of the blades is 300 m/s, and the radial component of the air velocity at the tip is 150 m/s. air is inducted at 101.3 kpa and a stagnation temperature of 305 k. the mass flow rate is 3 kg/s. consider the power input factor to be equal to 1.04 and a stagnation temperature at the compressor exit of 370 k, if the flow is isentropic. assume cp-1005 j/kg. k. find the power input to the compressor (in kw)

Answers: 3

Show answers

Another question on Engineering

Engineering, 03.07.2019 15:10

Ahouse has the following electrical appliance usage (1) single 40w lamp used for 4 hours per day (2) single 60w fan used for 12 hours per day (3) single 200w refrigerator that runs 24 hours per day with compressor run 12 hours and off 12 hours find the solar power inverter size in watt with correction factor of 1.25.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

During a steady flow process, the change of energy with respect to time is zero. a)- true b)- false

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Slip occurs via two partial dislocations because of (a) the shorter path of the partial dislocation lines; (b) the lower energy state through partial dislocations; (c) the charge balance.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Manometers are good examples of measuring instruments, nowadays they are not as common as before. a)-capacitive probe gauges b)-gravitational gauges deformation ) gauges d)-digital gauges

Answers: 1

Answer

You know the right answer?

An industrial centrifugal air compressor has 34 radial blades that has no pre-whirl. the tip speed o...

Questions