Which statement about maintaining accurate and complete data is true? Group of answer choices Data cleansing may involve standardizing data. The only source of "bad data" is user data-entry errors. Data enhancement techniques can fully substitute for data cleansing. Eliminating all "bad data" is a reasonable goal, even on a limited budget.

Which of the following methods could be considered a “best practice” in terms of informing respondents how their answers to an on-line survey about personal information will be protected? respondents are informed that investigators will try to keep their participation confidential; however, confidentiality cannot be assured. respondents are informed that a research assistant will transfer all the research data to a password-protected computer that is not connected to the internet, via a usb flashdrive. the computer is located in a research team member’s office. the investigator uses the informed consent process to explain her institution’s method for guaranteeing absolute confidentiality of research data. the investigator uses the informed consent process to explain how respondent data will be transmitted from the website to his encrypted database without ever recording respondents’ ip addresses, but explains that on the internet confidentiality cannot be absolutely guaranteed.

Write a computer program to calculate the three-phase fault current for a fault at f in figure 1.16, with the network normal, and with one line at a time removedproblems 1.1 write a computer program to calculate the three-phase fault current for a fault at f in figure 1.16, with the network normal, and with one line at a time removed 20 power system relaying from service. the positive-sequence impedance data are given in the accompanying table. use the commonly made assumption that all prefault resistance values are (1.0+j0.0) pu, and neglect all resistance values. calculate the contribution to the fault flowing through the cb b and the voltage at that bus. for each calculated case, consider the two possibilities: cb b2 closed or open. the latter is known as the stub-end fault í• figure 1.16 problem 1.1 system data for figure 1.16 from to positive sequence 0.0+j0.1 0.05j0.15 0.04 j0.2 0.01 jo.i 0.015 + j0.15 0.01 j0.19 0.01 +j0.19 0.03+j0.1 0.0+j0.08 6 6 6 from service. the positive-sequence impedance data are given in the accompanying table. use the commonly made assumption that all prefault resistance values are (1.0 + j 0.0) pu, and neglect all resistance values. calculate the contribution to the fault flowing through the cb b1, and the voltage at that bus. for each calculated case, consider the two possibilities: cb b2 closed or open. the latter is known as the “stub-end” fault.

Suppose we have a byte addressable computer that has a 32-byte cache with 8 bytes per block. the memory address is 8 bits long. the system accesses memory addresses (in hex) in this exact order: 6e, b9, 17, e0, 4e, 4f, 50, 91, a8, ab, ad, 93, and 94. (a) assuming the cache is direct mapped, what memory addresses will be in cache block 2 after the last address has been accessed? (b) assuming the cache is direct mapped, what is the hit ratio for the entire memory reference sequence given, assuming the cache is initially empty? (c) assuming the cache is 2-way set associative with a lru replacement policy, what is the hit ratio?