2.10 LAB*: Program: Cooking measurement converter Attached is the instructions and my code. When I run it, I don't get the full 100%

Problems: 1. using textbooks, reference books, and internet as your source of research, draw the following microprocessor microarchitectures i. intel 8086 ii. motorola 68000 i atmel atmega32 iv. mips single cycle v. arm cortex-m3 write an hdl module for a hexadecimal seven-segment display decoder. the input is 4-bit binary representing a hex number (0-f), and the output is 8-bit seven segment display bits (a-h). thus, the decoder must handle the digits 10 - 15 to display a-f respectively, in addition to 0-9 numbers. 2. design a 4-bit left and right rotator (both outputs). first sketch schematic diagrams of your design. then implement your design using hdl coding. 3. 4. design a modified priority encoder that receives an 8-bit input, a7: 0 and produces a 3-bit output, y2o. y indicates the most significant bit of the input that is true. y should be 0 if none of the inputs are true. give a simplified boolean equation, sketch a schematic, and write an hdl code. 5.write an 8: 1 multiplexer module called mux8 with selection inputs s, data input d, and data output y. data input (d) and data output (v) are 32-bit wide

Representa os dados de um banco de dados como uma coleç? o de tabelas constituídas por um conjunto de atributos, que definem as propriedades ou características relevantes da entidade que representam. marque a alternativa que representa o modelo descrito no enunciado. escolha uma:

Write a method that takes in an array of point2d objects, and then analyzes the dataset to find points that are close together. be sure to review the point2d api. in your method, if the distance between any pair of points is less than 10, display the distance and the (x,y)s of each point. for example, "the distance between (3,5) and (8,9) is 6.40312." the complete api for the point2d adt may be viewed at ~pf/sedgewick-wayne/algs4/documentation/point2d.html (links to an external site.)links to an external site.. try to write your program directly from the api - do not review the adt's source code.