Nate, an employee in your organization, has started to work from home two days a week. Nate uses the same company laptop while working in the office and working at home. Nate's laptop automatically connects to the wireless network in the office, but does not automatically connect to his home wireless network. Nate would like the laptop to connect automatically at home and at work. Which of the following would best allows this to happen? 1) Configure automatic private IPv4 addressing.
2)Configure an alternate TCP/IP configuration on the laptop's wireless adapter to use a static IP address that is compatible with the home network.
3)Configure a static IP address that works for both the office and the home wireless networks

Write a program in plp assembly that counts up by one starting from zero (or one) inside a loop and writes this value to the leds every time the value is increased. the memory address of the leds is 0xf0200000. the table below shows the meaning and an example usage of the instructions covered in the video, plp instructions for project 1. instruction example usage meaning load immediate li $t0, 8 register $t0 is set to the value, 8. store word sw $t2, 0($t1) the value in register $t1 is used as the memory address. the value in register $t2 is copied into this memory address. add addiu $t4, $t3, 29 register $t4 is assigned the sum of 29 and the value in register $t3. jump j your_label_name the program jumps to the line following the label, "your_label_name: ". label your label name: defines a label called "your_label_name: " that can be jumped to