After upgrading a fiber link from 1Gbps, a network technician ran a speed test of the link. The test shows the link is not operating at full speed, and connectivity is intermittent. The two buildings are 1,476ft (450m) apart and are connected using CM4 fiber and 10G SR SFPs. The fiber runs through the electrical and boiler rooms of each building. Which of the following is the MOST likely cause of the connectivity issues? ​
A) The wrong SFPs are being used
B) There is interference from the electrical room
​C) CM1 fiber should be used instead
D) There is heat from the boiler room

What type of computer network ensures high security ?

You need to design a circuit that implements the functions in the following table: s0 s1 function0 0 a + 10 1 a – b1 0 a + b1 1 a – 1s0 and s1 are 1-bit control inputs to select the function of the circuit. inputs a and b are 4-bitnumbers in 2s complement form. the output is also a 4-bit number in 2s complement form.you are allowed to use only one ttl 7483 4-bit adder to implement all the functions. but anynumber of other components (except the adder) can be used.hint: design a combinational logic circuit to modify the input b and the “carry input” of theadder depending on the control inputs s0 and s1.important: lab grade will depend on the working of the circuit & will be checked of by your labinstructor.1. is the output valid for the following input combinations: a. s0 = 0, s1 = 0, a = 7, b = 3? b. s0 = 0, s1 = 1, a = 7, b = 3? c. s0 = 1, s1 = 0, a = -4, b = -5? d. s0 = 1, s1 = 1, a = -8, b = 6? 2. what is the range of inputs (for both a and b) that will produce the valid output for all the functions?

Write a program that performs a simple n-body simulation, called "jumping leprechauns." this simulation involves n leprechauns, numberd 1 to n. it maintains a gold value g_i for each leprechaun i, which begins with each leprechaun starting out with a million dollars worth of gold, that is, g_i = 1000000 for each i = 1,. in addition, the simulation also maintains, for each leprachaun,i, a place on the horizon, which is represented as a double-precision floating point number, x_i. in each iteration of the simulation, the simulation processes the leprachauns in order. processing a leprachaun i during its iteration begins by computing a new place on the horizon for i, which is determined by the assignment: